Kanungo Enterprises
Kanungo Enterprises
Gotri, Vadodara, Gujarat
Send E-mail
Send SMS

Tradit Tape & Gasket


Offering you a complete choice of products which include style 2236 flexible graphite yarn with inconel wire, tf1570 blue tealon sheet, welded gaskets, 25bi multi-directionally expanded ptfe gasket tape, expanded ptfe gasket tape and spiral wound gasket.

Get Best Quote

Approx. Rs 1 Lakh / Meter Get Latest Price

Product Details:
ColorBlack
BrandTradit
Pack typeRoll
Minimum Temperature-240 Deg C
Maximum Temperature455 Deg C
Steam Temperature650 Deg C
Static Pressure450 bar
pH0-14

The new TEADIT® packing Style 2236 is made from layers of flexible graphite tape plied into compact strands; each individual filament is reinforced with an Inconel wire jacket. This yarn is then treated in a special process and braided to form a dense yet malleable packing, which is subsequently treated with lubricating agents to reduce stem friction and a corrosion inhibitor to prevent pitting (Inconel is a registered trademark of International Co.). TEADIT® Style 2236 is a special valve packing which assures extremely low emission, especially designed for high pressure and high temperature service. It is self-lubricating, non hardening, dimensionally stable and easy to install. The Inconel wire mesh covering makes this packing highly resistant to extrusion, the advanced construction assures supreme leakage control and highest integrity in service.


Typical applications for style 2236 include all the valves where LOW EMISSION is a must. This packing is suitable for VOC and VHAP emission regulations and exceeds TA-Luft requirements. It is designed for steam applications, Teadit style 2236 can also be used with most chemicals and gases.


It is not suitable for highly oxidizing agents at high temperature.


It has high mechanical and thermal stability; chemically inert within pH range 0-14; quick and easy to install; low friction, special lubricating system; corrosion inhibitor.


Please note: the colour of the actual product might vary from the above image on this data-sheet.

  • Certified Low-Leakage Packing Technology
  • TA-Luft approved
  • Suitable to VOC and VHAP emissions regulation
  • Environmentally friendly valve stem packing with extreme emissions control
  • API 622
  • API 607
  • ISO 15848

Yes! I am Interested
View PDF


REQUEST CALLBACK
Get Best Quote

Approx. Rs 10,000 / Square Feet Get Latest Price

Product Details:
ColorBlue
Temperature-268 to 260 Deg C
Max Pressure55 bar (800 psig)
BrandTradit
Pressure x Temperature Bar x Deg CThickness 1/16 Inch, Thickness 1/8 Inch
Sheet Size1500 mm x 1500 mm
Availability0.5 mm up to 3.2 mm
CompositionPTFE with glass microspheres
ModelTF1570

Tealon TF1570 is filled with glass microspheres and is suitable for aggressive chemical applications. It meets FDA conformance for service within food and pharmaceutical applications. TF1570 is the preferred material for fragile flanges, glass lined equipament or other applications that require higher compressibility.


Approvals:

  • TA-Luft — FDA — Blow-Out — ABS — EU 1935/2004

Specification :
Physical PropertyType of TestTF1570
Color
Blue
Sealability (ml/h)ASTM F 37A0.12
Creep Relaxation (%)ASTM F 3840
Compressibility(%)ASTM F 36M25-40
Recovery Min. (%)ASTM F 36M30
Tensile Strength (MPa)ASTM F 15214



Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 10,000 / Piece Get Latest Price

Product Details:
Thickness5-10 mm
BrandTradit
Usage/ApplicationIndustrial
Packaging TypePackets
ShapeRound
Temperature-20-50 Degree C
Outer Diameter12-15 mm

For over 20 years TEADIT has been welding large size PTFE-gaskets and PTFE envelope gaskets. We enhanced this practical knowledge, the technology and materials to provide customers with gaskets in big dimensions (larger than sheet size) made from our structured TF materials. Our precisely manufactured welded gaskets achieve the same tightness classes as gaskets made from one single piece.
Advantages:
  • Same leakage classes as gaskets cut from one piece.
  • Gaskets in diameters far beyond sheet size are possible.
  • Maximum material yield by producing gaskets from welded segments, therefore more economical.
  • TEADIT welded gaskets are manufactured true to size. This results in fast and easy installation, as such close tolerances cannot be achieved by welding the gasket on site.

Application areas:
  • Equipment which requires gaskets bigger than the available sheet(s).
  • Big welded gaskets are optimizing material cost.

By research and testing TEADIT provided evidence that welded gaskets made from TEADIT TF materials, in terms of leakage, show no difference to gaskets cut from one piece. In test results it can be seen that at an applied gasket pressure of 20MPa both the welded and the single-piece gasket reach a leakage class of 10-2 mg / (s·m).
At a gasket pressure of 40MPa both types of gaskets reach a leakage class of 10-4 mg / (s·m). Tests have been carried out according to DIN EN 13555 at room temperature with Helium at an internal pressure of 40bar.

Yes! I am Interested


Get Best Quote

Approx. Rs 10,000 / Meter Get Latest Price

Product Details:
BrandTradit
Packaging TypeRoll
ColorGrey
Minimum Temperature-240 Deg C
Short Term Max Temp315 Deg C
Maximum Temperature+270 Deg C
PressureFrom vacuum up to 200 bar
pH0 - 14
Model25BI

TEADIT® 25BI is a multidirectionally expanded gasket-tape, produced from 100% pure PTFE (Polytetrafluorethylen). The whole production process is subject to strictest quality control, registered under DIN EN ISO 9001 and EN ISO 14001.


TEADIT® 25BI – due to its excellent malleability and adaptability – is particularly well suited to compensate for irregularities or damages on the sealing areas, as well as for all stress-sensitive joints. A special manufacturing process results in almost equal tensile strength in both the longitudinal and cross direction. As a result of this, the material does not change its width under compression. This is in stark contrast to normal expanded PTFE tapes!


TEADIT 25BI, because of this property, is extremely well suited as a gasket material for narrow sealing areas and in all applications where a defined gasket width (under load) is required. Typical applications are enamelled and glass flanges, heat exchangers, large flanges and containers, pressure vessels, suction filters and strainers, etc.

Approvals:
  • FDA (incl. adhesive backing)
  • EU 1935/2004
  • TA-Luft
  • WRAS

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 5,000 / Onward Get Latest Price

Product Details:
BrandTradit
Packaging TypeRoll
Usage/ApplicationIndustrial
MaterialPTFE
PatternPlian

Yes! I am Interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 5,000 / Onward Get Latest Price

Product Details:
PressureHigh Pressure
Temperature180 Degree C
ColorSilver
BrandTradit
MaterialMild Steel

Yes! I am Interested


 






Corporate Brochure




 

 

Send SMS
Kanungo Enterprises
Tejas Parikh  (Owner)
309, Lotus Elite, Gotri Sevasi Road
Vadodara - 390019 , Gujarat , India
Send E-mail
Share Us:
X